Mechanical

Tremco offers a broad range of firestop products and solutions to help contain fire, smoke and toxic gases to the area of origin by sealing around penetrations and construction joints in fire-rated floors and walls. The TREMstop® brand of passive fire protection products features sealants and intumescent devices. Tremco has more than 400 independently tested fire-rated systems for through-penetrations and joints.

Tapcon is the #1 recognized screw anchor brand in the industry with unmatchable performance in concrete, block and brick applications, making it a viable alternative to expansion anchors, plugs and lag shields.

Blue Climaseal® coating is uniquely applied in multiple stages through dip-spin technology for extra corrosion resistance.

Advanced Threadform Technology™ intertwines a large “chiseled” main thread with a small diameter thread to reduce head snapping and provide:

    • 30% lower installation torque
    • 20% more holding power

Finished head gives a low, uniform profile and aesthetic appeal.

Close-to-edge placement. No expansion or outward pressure allows installation near a concrete’s edge without cracking.

Easily reversible and removable. No inserts required.

Zurn trench drain systems offer the durability and flexibility expected in commercial applications. Zurn’s line of fiberglass trench drains, plastic trench drains and stainless drains provide a drainage solution for every situation.

Zurn frame and grate systems give contractors a range of customization options otherwise limited by modular drainage channels. Available in 6″, 12″, 17″, 23″ and 26″ widths, the Zurn Z700 Frame and Grate Series adapts to accommodate unique project requirements.

Hilti Power-actuated fastening systems are recognized as a safe, acceptable, and cost effective method of making fastenings into various base materials such as concrete, steel, and masonry. Designers can utilize our innovative power-actuated fasteners in the design of partition walls, sill plate attachments, ceiling hangers, pipe/conduit hangers, and much more.

EUCOBond LS is a high performance polyurethane adhesive used for bonding numerous concrete, natural stone, and concrete masonry applications. EUCOBond LS is dispensed as a foam that instantly collapses to a fast-setting gel. When applied in a 1/2 inch (1.3 cm) bead, one can of EUCOBond LS yields over 450 linear feet (137 meters), about eight times the yield of conventional cartridge adhesives. EUCOBond LS is ideal for use where fixed, permanent positioning of stone or concrete products is desired, indoors and out.

• Easy application – no mixing, no water, no gun needed • Compatible with a variety of hardscape construction materials • Withstands freeze-thaw cycling • Structural grade performance • Can be used in wet/frozen conditions • Saves time and money • Resistant to dilute acids and caustic solutions

 

 

 

 

 

 

 

Scroll to Top